Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613666033393 | ||
| +8613666033393 | |||
| 13666033393 | |||
| Add | Room 1004, No. 62 Xiangxiu Li, Siming District, Xiamen City, Fujian Province, China |
Technical Specifications
| Parameter | Details |
|---|---|
| Product Type | Proximity Probe (3300 XL 8 mm series) |
| Model Number | 330101-00-24-05-02-00 |
| System Compatibility | 3300 XL Proximitor Sensor and Extension Cable |
| Sensing Technology | Eddy Current |
| Measurement Range | 2 mm (80 mils), linear from 0.25 mm to 2.3 mm |
| Scale Factor (ISF) | 7.87 V/mm (200 mV/mil) ±5% (5 m system) |
| Deviation from Straight Line (DSL) | ≤ ±0.025 mm (±1 mil) (5 m system) |
| Frequency Response | 0 to 10 kHz, ±3 dB |
| Minimum Target Size | 15.2 mm (0.6 in) diameter (flat target) |
| Minimum Shaft Diameter | 50.8 mm (2 in) / Recommended: 76.2 mm (3 in) |
| Operating Temperature – Probe | -52°C to +177°C |
| Operating Temperature – Sensor | -52°C to +100°C |
| Cable Type | 75Ω triaxial FEP insulated |
| Connector Type | Miniature coaxial ClickLoc connector (gold-plated) |
| Material – Probe Tip | PPS (Polyphenylene Sulfide) |
| Material – Probe Body | Stainless Steel AISI 303 or 304 |
| Environmental Protection | RFI/EMI immunity, IP54+ with connector protector |
| Pressure Seal | Viton® O-ring sealed (not pressure-tested by default) |
| Extension Cable Capacitance | ~69.9 pF/m |
| Connector Torque | Finger-tight (ClickLoc) |
| Total Length | 0.5 meter |
| Total Weight | Approx. 0.162 kg |
FAQ
Frequently Asked Questions (FAQ)
Q1: What does the model number 330101-00-24-05-02-00 represent?
A1: This model number specifies a 3300 XL 8 mm proximity probe with 3/8-24 UNF thread, 0.5-meter total length, standard FEP cable, ClickLoc connector with standard approval.
Q2: Can the probe be used in high-temperature environments?
A2: Yes. Standard probes operate up to 177°C, while Extended Temperature Range (ETR) versions are available for up to 218°C (probe tip) and 260°C (cable).
Q3: Is this probe interchangeable with older 3300 series components?
A3: Yes. The 3300 XL 8 mm probe is both electrically and physically compatible with legacy 3300 5 mm and 8 mm components.
Q4: What type of targets can this probe measure?
A4: It is factory-calibrated for AISI 4140 steel. Calibration to other materials is possible upon request.
Q5: How is the probe protected against electromagnetic interference?
A5: The system is designed with high RFI/EMI immunity, meeting CE requirements without the need for shielded conduit or metallic enclosures.
Q6: What is the recommended gap setting for radial vibration monitoring?
A6: Approximately 1.27 mm (50 mils), which corresponds to -9 Vdc output.
Q7: Does the probe support installation in hazardous areas?
A7: Yes. It carries CSA, ATEX, and IECEx approvals for use in Zone 0 and Zone 2 environments depending on installation method.
Q8: Is additional sealing required for the connector ends?
A8: Connector protectors are recommended and can be pre-installed or ordered separately to enhance environmental sealing and reduce contamination risk.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
