Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613666033393 | ||
| +8613666033393 | |||
| 13666033393 | |||
| Add | Room 1004, No. 62 Xiangxiu Li, Siming District, Xiamen City, Fujian Province, China |
Technical Specifications
| Parameter | Description |
|---|---|
| Model Number | AAM50-S1 |
| Function | Current Output Module |
| Output Type | Analog Output (Current) |
| Output Range | 4 to 20 mA DC |
| Channels | Typically single or multi-channel (exact number not specified) |
| Output Accuracy | Within ±0.1% of full scale |
| Resolution | 12-bit or higher (typical for analog modules) |
| Isolation | Yes (channel-to-ground) |
| Interface Type | For Remote I/O (RIO) systems |
| Operating Voltage | Supplied via RIO backplane |
| Calibration | Factory calibrated; field recalibration not required |
| Application | Industrial process control for analog actuators |
| Mounting | Mounted in RIO base (rack-mounted) |
| Compatible Systems | CENTUM VP RIO-based I/O stations |
| Dimensions (W × H × D) | 42.9 × 130 × 146.8 mm |
| Weight | 0.10 kg |
| Operating Temperature | 0 to 50°C (typical range) |
| Storage Temperature | -20 to 70°C (typical range) |
| Humidity Tolerance | 5% to 95% RH (non-condensing) |
| EMC/EMI Compliance | Yes (compliant with industrial standards) |
FAQ
Frequently Asked Questions (FAQ)
Q1: What is the primary function of the AAM50-S1 module?
A1: The AAM50-S1 module is designed to output analog current signals (typically 4–20 mA) for controlling final elements such as control valves or other current-driven actuators in a process automation system.
Q2: Is the AAM50-S1 suitable for use in safety systems?
A2: No, the AAM50-S1 is intended for standard control systems using the Remote I/O (RIO) architecture. For safety systems, Yokogawa offers certified SIS modules under the ProSafe-RS line.
Q3: How many current output channels does the AAM50-S1 have?
A3: The documentation does not specify the number of channels, but based on Yokogawa’s typical AAM series configuration, it is usually a multi-channel (commonly 4 or 8) module. Verification from the module’s datasheet or label is recommended.
Q4: Is this module isolated between channels?
A4: The AAM50-S1 provides isolation from system ground, which is typical for protection and noise immunity, though isolation between individual channels is generally not provided.
Q5: What are the dimensions and weight of the AAM50-S1?
A5: The dimensions are 42.9 mm (W) × 130 mm (H) × 146.8 mm (D), and the weight is 0.10 kg.
Q6: Can the AAM50-S1 be hot-swapped during operation?
A6: No, hot-swapping is not supported. The module should be replaced only after the system is shut down or the slot is powered off, unless used within a redundant configuration that supports live replacement.
Q7: What kind of calibration is required for the AAM50-S1?
A7: The module is factory-calibrated and does not require field calibration under normal operation. Periodic validation may be conducted as per site quality protocols.
Q8: What Yokogawa systems is the AAM50-S1 compatible with?
A8: The AAM50-S1 is designed for use with Yokogawa’s CENTUM VP Remote I/O (RIO) systems. It integrates into RIO base units via standard mounting procedures.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
