Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613666033393 | ||
| +8613666033393 | |||
| 13666033393 |
Technical Specifications
| Parameter | Specification |
|---|---|
| Model Number | 330103-00-10-10-02-00 |
| Probe Type | 3300 XL 8 mm Proximity Probe |
| Thread Type | M10 x 1 (metric), without armor |
| Total Length | 1.0 meter |
| Weight | 0.323 kg (typical for 1.0-meter probe only) |
| Tip Diameter | 8.0 mm (0.31 in) |
| Probe Tip Material | Polyphenylene Sulfide (PPS) |
| Case Material | AISI 303 or 304 Stainless Steel |
| Cable Type | 75Ω triaxial, FEP insulated |
| Connector | Miniature coaxial ClickLoc |
| Output Voltage Sensitivity | 7.87 V/mm (200 mV/mil) ±5% (1 m systems) |
| Linear Range | 2.0 mm (80 mils), from 0.25 mm to 2.3 mm (10 to 90 mils) |
| Recommended Gap Voltage | -9 Vdc ≈ 1.27 mm (50 mils) |
| Operating Temperature (Probe) | -52°C to +177°C (-62°F to +350°F) |
| Min. Shaft Diameter | 50.8 mm (2 in), recommended ≥ 76.2 mm (3 in) |
| Minimum Bend Radius (Cable) | 25.4 mm (1.0 in) |
| Tensile Strength | 330 N (75 lbf) from probe case to probe lead |
| Mounting Torque (Forward Mount) | Recommended: 11.2 N·m (100 in·lbf); Max: 33.9 N·m (300 in·lbf) |
| RFI/EMI Immunity | High – compliant with CE requirements, no shielded conduit necessary |
| Humidity Resistance | <3% change in scale factor at 93% humidity (IEC 68-2-3, 56 days) |
| Certifications | CSA, ATEX, IECEx, CE, FCC compliant |
FAQ
Frequently Asked Questions (FAQ)
Q1: What is the typical application of the 330103-00-10-10-02-00 probe?
A1: It is primarily used for measuring vibration and position on fluid-film bearing machines, as well as Keyphasor reference and overspeed monitoring.
Q2: Does this probe comply with API 670 standards?
A2: Yes, when used in a 5-meter system, it fully complies with the mechanical configuration, linear range, and accuracy requirements of API 670.
Q3: Is the 330103 probe backward compatible with previous 3300 series components?
A3: Yes, it is both electrically and mechanically compatible with non-XL 3300 series 5 mm and 8 mm system components.
Q4: What is the recommended gap voltage for optimal vibration measurements?
A4: The recommended gap voltage is -9 Vdc, which corresponds to a gap of approximately 1.27 mm (50 mils).
Q5: What type of connector is used on this probe?
A5: It uses a corrosion-resistant, gold-plated miniature coaxial ClickLoc connector, which clicks into place without requiring tools.
Q6: Is the probe suitable for high-temperature applications?
A6: The standard probe supports up to +177°C. For higher temperatures (up to +218°C), an Extended Temperature Range (ETR) variant should be used.
Q7: Can this probe be used without an extension cable?
A7: Yes, the 1.0-meter version is often used without an extension cable and connects directly to the Proximitor Sensor.
Q8: What is the impact of magnetic fields on this probe?
A8: The probe shows minimal output change due to magnetic fields, with sensitivity values as low as 0.0119 mil pp/Gauss at 10 mil gap in a 1-meter configuration.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
