Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613666033393 | ||
| +8613666033393 | |||
| 13666033393 | |||
| Add | Room 1004, No. 62 Xiangxiu Li, Siming District, Xiamen City, Fujian Province, China |
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | Bently Nevada 330180-90-05 3300 XL Proximitor Sensor |
| System Components | 1× 3300 XL Probe + 1× Extension Cable + 1× 3300 XL Proximitor Sensor |
| Input | Compatible with 3300 XL 8 mm and 3300 5 mm probes & cables |
| Power Supply | -17.5 Vdc to -26 Vdc, max 12 mA (standard) |
| Output Resistance | 50 Ohms |
| Linear Range | 2 mm (80 mils), approx. 0.25 mm to 2.3 mm (10 to 90 mils) |
| Recommended Gap Setting | -9 Vdc (approx. 1.27 mm or 50 mils) |
| Frequency Response | 0 to 10 kHz (+0, -3 dB, up to 305 meters field wiring) |
| Incremental Scale Factor (ISF) | 7.87 V/mm ±6.5% (for 9 m system) |
| Deviation from Best Fit Line | ≤ ±0.038 mm (1.5 mils) for 9 m system |
| Target Material (Factory Default) | AISI 4140 Steel |
| Probe Cable Impedance | 75Ω triaxial |
| Connector Type | ClickLoc gold-plated, finger-tight |
| Temperature Range – Probe | -52°C to +177°C (Standard), up to +218°C (ETR Tip) |
| Temperature Range – Extension Cable | -52°C to +260°C (ETR) |
| Temperature Range – Sensor | Operating: -52°C to +100°C; Storage: -52°C to +105°C |
| Humidity | ≤3% change in ASF at 93% RH over 56 days |
| Pressure | Sealed with Viton® O-ring (not pressure tested by default) |
| Mounting | DIN Rail or Panel Mount (4-hole footprint compatible) |
| Minimum Shaft Diameter | Recommended: ≥76.2 mm (3 in); Minimum: 50.8 mm (2 in) |
| Minimum Target Size | 15.2 mm (0.6 in) |
| Total Length | 9.0 meters |
| Weight | Approx. 0.246 kg (sensor only) |
FAQ
Frequently Asked Questions (FAQ)
Q1: What is the standard total system length of the 330180-90-05 model?
A1: The standard total system length is 9.0 meters.
Q2: Is this sensor compatible with older 3300 series components?
A2: Yes, it is fully backward compatible with non-XL 3300 5 mm and 8 mm components.
Q3: What is the recommended shaft diameter for accurate measurements?
A3: The recommended shaft diameter is at least 76.2 mm (3 inches).
Q4: Can the sensor operate under high-temperature conditions?
A4: Yes, the ETR version of the probe and cable supports up to 260°C.
Q5: What is the factory default calibration material?
A5: The sensor is calibrated to AISI 4140 steel by default.
Q6: What is the maximum allowed connector torque?
A6: The maximum torque for connectors is 0.565 N·m (5 in·lbf).
Q7: Is the system resistant to electromagnetic interference?
A7: Yes, the Proximitor sensor offers excellent RFI/EMI immunity and CE compliance.
Q8: What is the environmental sealing method used for the probe?
A8: The probe uses a Viton® O-ring to seal against differential pressure.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
