Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613666033393 | ||
| +8613666033393 | |||
| 13666033393 | |||
| Add | Room 1004, No. 62 Xiangxiu Li, Siming District, Xiamen City, Fujian Province, China |
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | Bently Nevada 330850-50-00 |
| System Length | 5.0 meters |
| Total Weight | 0.255 kg (Proximitor Sensor only) |
| Linear Range | 12.7 mm (500 mils) |
| Average Scale Factor | 0.787 V/mm (20 mV/mil) |
| Input Power Supply | -17.5 Vdc to -26 Vdc (12 mA max) |
| Probe Tip Material | Polyetheretherketone (PEEK) |
| Probe Case Material | AISI 304 stainless steel |
| Sensor Material | A380 aluminum |
| Cable Type | 75 Ω triaxial FluidLoc PFA-insulated |
| Output Resistance | 50 Ω |
| Probe Operating Temp | -35°C to +200°C (short-term +250°C) |
| Sensor Operating Temp | -51°C to +100°C |
| Environmental Humidity | 100% condensing, non-submersible |
| Recommended Target Size | ≥61 mm (2.4 in) diameter flat target |
| Minimum Bend Radius | 25.4 mm (1.0 in) |
| Frequency Response | 0 to 2.7 kHz, typical -3 dB with 305 m field wiring |
| EMC Compliance | EN 61000-6-2 / EN 61000-6-4 / CE / RoHS |
| Hazardous Area Approvals | CSA / ATEX / IECEx (Zone 0, Zone 2, Class I Div. 2, etc.) |
FAQ
Frequently Asked Questions (FAQ)
Q1: What is the system length and weight of the 330850-50-00 sensor?
A1: The total system length is 5.0 meters, and the sensor weighs approximately 0.255 kg.
Q2: What is the linear measurement range of this sensor?
A2: It provides a linear range of 12.7 mm (500 mils), from 0.63 mm to 13.33 mm.
Q3: What is the output scale factor of this sensor system?
A3: The nominal output scale factor is 0.787 V/mm or 20 mV/mil.
Q4: What type of environments can the probe operate in?
A4: The probe can withstand continuous operation at temperatures up to 200°C and short-term exposure up to 250°C.
Q5: What material is used for the sensor housing?
A5: The sensor housing is made of A380 aluminum for durability and EMI shielding.
Q6: Is this sensor system compatible with older Bently Nevada systems?
A6: Yes, it is backward-compatible with 7200 25 mm and 35 mm systems, but all components must be replaced as a set.
Q7: What certifications does the sensor meet for hazardous environments?
A7: It meets CSA, ATEX, and IECEx certifications, allowing installation in hazardous locations such as Zone 0 and Zone 2.
Q8: What is the recommended minimum target size for accurate measurement?
A8: A flat target with a minimum diameter of 61 mm (2.4 inches) is recommended.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
