Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613666033393 | ||
| +8613666033393 | |||
| 13666033393 |
Technical Specifications
| Item | Specification |
|---|---|
| Model | 330101-00-12-05-02-00 |
| Probe Type | Non-contact eddy current proximity probe |
| Probe Diameter | 8 mm |
| Probe Cable Type | 75Ω triaxial FEP insulated cable |
| Connector Type | Gold-plated ClickLoc with connector protector |
| Total Length | 0.5 meter (including probe and extension cable) |
| Recommended Gap | 1.27 mm (50 mils) |
| Linear Range | 0.25 mm to 2.3 mm (10 to 90 mils) |
| Output Scale Factor | 7.87 V/mm (200 mV/mil) ±5% (standard system) |
| Case Material | AISI 303 or 304 stainless steel |
| Tip Material | PPS (Polyphenylene sulfide) |
| Min. Bend Radius | 25.4 mm (1.0 inch) |
| Tensile Strength | 330 N (75 lbf) probe case to lead |
| Weight (Total) | 0.162 kg (for 0.5 meter system) |
| Operating Temp | Probe: -52°C to +177°C; Sensor: -52°C to +100°C |
| Storage Temp | Probe: -52°C to +177°C; Sensor: -52°C to +105°C |
| Humidity Effect | Less than 3% change in ASF in 93% humidity |
| Min. Target Size | 15.2 mm flat metal surface |
| Recommended Shaft | Minimum 50.8 mm; Recommended 76.2 mm |
| Output Impedance | 50 Ω |
FAQ
Frequently Asked Questions (FAQ)
Q1: What is the operating temperature range of this probe?
A1: The operating range is -52°C to +177°C, suitable for most industrial environments.
Q2: Which Proximitor sensors are compatible with this probe?
A2: It is compatible with the Bently Nevada 3300 XL Proximitor Sensor and supports full interchangeability.
Q3: What is the linear measurement range of this probe?
A3: The linear range is 2 mm, starting from 0.25 mm to 2.3 mm, with a voltage output range of approximately -1 V to -17 V.
Q4: Can this probe be used in high-temperature environments?
A4: Yes, the standard version supports up to 177°C. For higher temperatures, the ETR version is available up to 218°C.
Q5: Does it comply with API 670 standard?
A5: Yes, the standard 5-meter system complies with API 670 requirements for mechanical configuration and performance.
Q6: What applications is this probe suitable for?
A6: It is widely used for vibration and position measurements in fluid-film bearing machines and for Keyphasor/speed measurements.
Q7: Is this probe resistant to electromagnetic interference?
A7: Yes, it has excellent RFI/EMI immunity and meets CE requirements without the need for shielded conduit.
Q8: Are any special tools needed for connector installation?
A8: No special tools are required. The ClickLoc connectors are designed for finger-tight installation with a locking click.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
