Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613666033393 | ||
| +8613666033393 | |||
| 13666033393 |
Technical Specifications
PR6423/010-010 Eddy Current Sensor
| Parameter | Specification |
|---|---|
| Sensor Head Diameter | 8 mm |
| Weight (Sensor with 1m Cable) | 0.1 kg (100 grams) |
| Linear Measurement Range | 2 mm (80 mils) |
| Initial Air Gap | 0.5 mm (20 mils) |
| ISF (Incremental Scale Factor) | 8 V/mm ±5% @ 0–45°C |
| DSL (Linearity Error) | ±0.025 mm (±1 mil) @ 0–45°C |
| Minimum Shaft Diameter | 25 mm |
| Target Material | Ferromagnetic Steel (42CrMo4 / AISI 4140 standard) |
| Protection Class | IP66 (IEC 60529) |
| Operating Temperature | Sensor + 1m Cable: -35 to +180°C; Cable & Connector: -35 to +150°C |
| Materials | Tip: PEEK; Case: Stainless Steel; Cable: PTFE; Connector: Brass (nickel-plated) |
| Thread Options | M10x1 or 3/8”-24 UNF |
| Certification | CE, ATEX, IECEx, CSA, UL compliant |
CON021 Signal Converter
| Parameter | Specification |
|---|---|
| Compatible Sensors | PR6422, PR6423, PR6424, PR6425, PR6426 |
| Measuring Range (PR6423) | 2 mm (standard), 3–4 mm (extended range) |
| Frequency Range | 0–20000 Hz |
| Rise Time | <15 µs |
| Power Supply Voltage | -23V to -32V (for output range -4V to -20V); -21V to -32V (for -2V to -18V) |
| Operating Temperature | -30°C to +100°C |
| Shock Resistance | 5g @ 60 Hz |
| Protection Class | IP20 |
| Housing Material | LMgSi 0.5 F22 |
| Weight | ~0.12 kg (120 grams) |
| Mounting | 4 x M5x20 screws |
| Hazardous Area Certification | ATEX, IECEx, CSA (Intrinsic Safety and Non-sparking) |
FAQ
Frequently Asked Questions (FAQ)
Q1: What is the primary function of the PR6423/010-010 sensor?
A1: It is designed to measure shaft displacement, position, eccentricity, and speed in rotating machinery.
Q2: What is the diameter and weight of the sensor head?
A2: The sensor head diameter is 8 mm and weighs approximately 0.1 kg with a 1-meter cable.
Q3: Is the sensor suitable for use in hazardous areas?
A3: Yes, it is certified for use in hazardous environments according to ATEX, IECEx, and CSA standards.
Q4: What is the linear range of the sensor?
A4: The linear measurement range is 2 mm with a typical initial air gap of 0.5 mm.
Q5: What shaft material is required for accurate measurements?
A5: The target should be made of ferromagnetic steel, such as 42CrMo4 (AISI 4140).
Q6: Can the CON021 converter be used with other sensors?
A6: Yes, it supports PR6422, PR6423, PR6424, PR6425, and PR6426 series.
Q7: What is the output voltage range of the CON021 converter?
A7: It operates with an output range of -4V to -20V or -2V to -18V depending on supply voltage.
Q8: What is the protection level of the converter housing?
A8: The CON021 converter housing is rated IP20 and should be installed in a protected enclosure.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
