Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613666033393 | ||
| +8613666033393 | |||
| 13666033393 |
Technical Specifications
| Parameter Category | Details |
|---|---|
| Model Number | 330106-05-30-15-02-00 |
| Product Type | 3300 XL 8 mm Reverse Mount Proximity Probe |
| Mounting Thread | M10 x 1 |
| Probe Type | Non-armored, standard cable |
| Housing Material | Stainless Steel AISI 303 or 304 |
| Probe Tip Material | Polyphenylene Sulfide (PPS) |
| Cable Type | 75Ω triaxial FEP insulated with ClickLoc coaxial connector |
| Connector Type | Miniature ClickLoc coaxial connector |
| Minimum Cable Bend Radius | 25.4 mm |
| Total Probe Length | 1.5 meters |
| Weight (with cable) | Approx. 0.485 kg |
| Recommended Mount Torque | 7.5 N·m; maximum 22.6 N·m |
| Linear Range | 0.25 mm to 2.3 mm (10 mils to 90 mils) |
| Recommended Gap Voltage | -9 VDC (approximately 1.27 mm gap) |
| ISF (Incremental Scale) | 7.87 V/mm ±5% (5 m system); ±6.5% (9 m system) |
| Operating Temp Range | -52°C to +177°C (standard); up to +218°C (tip, high-temp option) |
| Storage Temp Range | -52°C to +177°C |
| Ingress Protection | IP54 (when properly installed and wired) |
| Certifications | CSA, ATEX, IECEx (Option Code 05) |
FAQ
Frequently Asked Questions (FAQ)
Q1: Is this probe suitable for high-temperature environments?
A1: Yes. A high-temperature version is available, supporting up to +218°C at the probe tip.
Q2: Are special tools required for connector installation?
A2: No. ClickLoc connectors are hand-tightened. A “click” sound confirms proper locking.
Q3: What machines is this probe suited for?
A3: It is designed for fluid-film bearing machines to measure vibration, position, and Keyphasor signals.
Q4: Is this probe compatible with non-XL components?
A4: Yes, it is electrically and physically compatible. However, system performance will match the lowest-spec component.
Q5: What is the recommended installation torque?
A5: Recommended torque is 7.5 N·m. Do not exceed 22.6 N·m.
Q6: Can the probe withstand high humidity?
A6: Yes. It has been tested under 93% relative humidity with less than 3% variation in ASF.
Q7: What is the minimum shaft diameter for reliable use?
A7: Minimum is 50.8 mm; 76.2 mm or larger is recommended to reduce cross-talk.
Q8: Are there restrictions on cable and probe length combinations?
A8: Yes. The total probe + extension cable length must match the Proximitor Sensor system length.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
