Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613666033393 | ||
| +8613666033393 | |||
| 13666033393 |
Technical Specifications
| Item | Description |
|---|---|
| Model Number | 330196-05-30-10-CN |
| System Type | ETR (Extended Temperature Range) Reverse Mount Probe |
| Probe Diameter | 8 mm |
| Total Length (C) | 1.0 meter |
| Cable Type | 75Ω triaxial FEP insulated cable with ClickLoc connector |
| Probe Housing Material | AISI 303 or 304 stainless steel |
| Tip Material | PPS (Polyphenylene sulfide) |
| Tensile Strength | 330 N (probe to lead), 270 N (lead to extension connector) |
| Min. Cable Bend Radius | 25.4 mm |
| Temperature Range (Probe) | -52°C to +218°C (tip), -51°C to +260°C (cable and connector) |
| Recommended Mounting Torque | 7.5 N•m (66 in•lbf) |
| Power Supply Requirement | -17.5 Vdc to -26 Vdc |
| Linear Range | 2 mm (from 0.25 mm to 2.3 mm) |
| Recommended Gap Setting | 1.27 mm (approximately -9 Vdc output) |
| Incremental Scale Factor | 7.87 V/mm (±6.5%) |
| Deviation from Best Fit Line | Less than ±0.038 mm (±1.5 mils) |
| Minimum Target Size | 15.2 mm diameter (flat surface) |
| Recommended Min Shaft Dia. | 76.2 mm |
| Weight | 0.323 kg for 1.0 meter configuration |
FAQ
Frequently Asked Questions (FAQ)
Q1: Is this probe suitable for high-temperature environments?
A1: Yes, this ETR probe supports up to 218°C at the tip and 260°C for the cable and connector.
Q2: What standards does the 330196-05-30-10-CN comply with?
A2: It complies with API 670 mechanical standards and has CSA, ATEX, and IECEx approvals.
Q3: Can it be used interchangeably with non-XL components?
A3: Yes, it is electrically and physically compatible with non-XL 3300 5 mm and 8 mm components.
Q4: What target material is the probe calibrated for?
A4: It is factory-calibrated for AISI 4140 steel. Calibration for other materials is available upon request.
Q5: What is the recommended gap setting?
A5: The recommended gap is 1.27 mm (50 mils), corresponding to approximately -9 Vdc output.
Q6: How is oil leakage prevented through the cable?
A6: The FluidLoc cable option prevents internal oil leakage through the cable core.
Q7: What is the weight of the probe?
A7: The probe weighs 0.323 kg in a 1-meter configuration.
Q8: Are any special tools required for installation?
A8: No, the ClickLoc connectors are designed for tool-free, finger-tight installation.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
