Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613666033393 | ||
| +8613666033393 | |||
| 13666033393 |
Technical Specifications
| Parameter | Specification |
|---|---|
| Product Model | 330104-00-03-10-02-00 |
| Probe Diameter | 8.0 mm |
| Thread Type | M10 x 1 (metric), with armor |
| Total Length | 1.0 meter (3.3 feet) |
| Weight | 0.323 kg (probe only) |
| Material – Probe Tip | Polyphenylene sulfide (PPS) |
| Material – Probe Case | AISI 303 or 304 Stainless Steel |
| Cable Type | 75Ω triaxial, FEP insulated (standard) |
| Minimum Cable Bend Radius | 25.4 mm (1.0 in) |
| Connector Type | Miniature coaxial ClickLoc gold-plated connector |
| Temperature Range – Probe | -52°C to +177°C (standard), up to +218°C (ETR) |
| Linear Range | 2 mm (80 mils), from 0.25 mm to 2.3 mm |
| Recommended Gap Voltage | -9 VDC (~1.27 mm gap) |
| Shaft Diameter (min / recommended) | 50.8 mm / 76.2 mm |
| System Frequency Response | 0 to 10 kHz (+0, -3 dB) |
| Pressure Rating | Viton O-ring sealed, not pressure tested by default |
| Compliance | API 670 compliant; CE, FCC, RoHS, SIL 2/3 certified |
FAQ
Frequently Asked Questions (FAQ)
Q1: What is the thread type of the 330104-00-03-10-02-00 probe?
A1: It uses an M10 x 1 metric thread.
Q2: What is the total length and weight of this probe?
A2: The probe is 1.0 meter long and weighs approximately 0.323 kg.
Q3: Can this probe be used in high-temperature environments?
A3: Yes, the standard version supports up to +177°C, and the ETR version supports up to +218°C.
Q4: What is the recommended shaft diameter for accurate measurements?
A4: The minimum shaft diameter is 50.8 mm, while the recommended is 76.2 mm.
Q5: Is this probe compatible with non-XL 3300 components?
A5: Yes, it is backward-compatible with non-XL 3300 5 mm and 8 mm systems.
Q6: What type of signal does this proximity probe measure?
A6: It provides a voltage output proportional to the distance to a conductive surface for vibration and position monitoring.
Q7: What materials are used in the probe construction?
A7: The tip is made of PPS, and the housing is stainless steel (AISI 303 or 304).
Q8: Does the probe require special tools for installation?
A8: No, the ClickLoc connector design allows for finger-tight installation without tools.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
