Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613666033393 | ||
| +8613666033393 | |||
| 13666033393 |
Technical Specifications
| Parameter | Specification |
|---|---|
| Probe Type | 3300 XL 8 mm Proximity Probe (M10 x 1 thread, armored) |
| Tip Material | Polyphenylene Sulfide (PPS) |
| Case Material | AISI 303 or 304 Stainless Steel |
| Cable Type | 75Ω triaxial FEP (standard) or PFA (ETR) insulated |
| Total Length | 1.0 meter |
| Weight | Approx. 0.323 kg (probe only) |
| Power Supply | -17.5 Vdc to -26 Vdc, max. 12 mA |
| Linear Range | 0.25 mm to 2.3 mm (10 to 90 mils) |
| Recommended Gap | -9 Vdc (approx. 1.27 mm / 50 mils) |
| Incremental Scale | 7.87 V/mm ±5% (for 5m or 1m systems) |
| Deviation DSL | Less than ±0.025 mm (±1 mil) |
| Temperature (Probe) | -52°C to +177°C (standard); up to +218°C for ETR probe tip |
| Temperature (Cable) | -52°C to +177°C (standard); up to +260°C for ETR cable |
| Minimum Shaft Diameter | Recommended: 76.2 mm (3 in) |
| Minimum Probe Spacing | 38 mm (radial) / 40 mm (axial) |
| Mount Torque | 7.5 N•m for forward/reverse mount probes |
| Min. Bend Radius | 25.4 mm (1 in) |
| EMI Resistance | Meets CE without shielded conduit |
FAQ
Frequently Asked Questions (FAQ)
Q1: What equipment is the 330104 probe suitable for?
A1: It is primarily used for vibration and position monitoring on fluid-film bearing machines, and for Keyphasor and speed detection.
Q2: Is this probe compliant with API 670?
A2: Yes, the 3300 XL 8 mm system fully meets API 670 standards for configuration, linear range, accuracy, and temperature stability.
Q3: Is this probe compatible with non-XL series components?
A3: Yes, but the performance will be limited to the non-XL component specifications.
Q4: What is the maximum temperature this probe can withstand?
A4: Standard probe up to +177°C, ETR probe tip up to +218°C, and cable up to +260°C.
Q5: What is the recommended minimum shaft diameter?
A5: 76.2 mm (3 inches). Smaller diameters may affect the scale factor.
Q6: Are special tools required for connector installation?
A6: No, the ClickLoc connectors are finger-tightened with an audible click to confirm lock.
Q7: Does this model come with armor?
A7: Yes, the 330104-00-08-10-02-00 is an armored probe variant.
Q8: How is the sealing of the probe ensured?
A8: A Viton® O-ring is used for sealing differential pressure; pressure testing is not standard and must be requested if needed.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
