Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613666033393 | ||
| +8613666033393 | |||
| 13666033393 |
Technical Specifications
| Parameter | Description |
|---|---|
| Model | IC694MDL645 |
| Type | DC Voltage Input Module (Positive/Negative Logic) |
| Number of Inputs | 16 (single group with one common terminal) |
| Rated Voltage | 24 VDC |
| Input Voltage Range | 0 to +30 VDC |
| On-State Voltage | 11.5 to 30 VDC |
| Off-State Voltage | 0 to +5 VDC |
| On-State Current | Minimum 3.2 mA |
| Off-State Current | Maximum 1.1 mA |
| Input Current | Typically 7 mA at 24 VDC |
| Response Time (ON/OFF) | 7 ms typical |
| Isolation (Field to Backplane) | 250 VAC continuous; 1500 VAC for 1 minute |
| Isolation (with 24V OUT used) | 50 VAC continuous; 500 VAC for 1 minute |
| Power Consumption (5V) | 80 mA from backplane 5V bus |
| Power Consumption (24V) | 125 mA from isolated 24V or user supply |
| Indicators | 16 green LEDs for input status |
| Dimensions | 34 mm x 145 mm x 140 mm |
| Weight | 0.159 kg |
FAQ
FAQs
Q1: What type of input logic does the IC694MDL645 support?
A1: It supports both positive and negative logic input configurations.
Q2: How many input points are available on this module?
A2: There are 16 discrete input points grouped with a single common terminal.
Q3: Can this module power field devices?
A3: Yes, field devices can be powered using the module’s 24V OUT and 0V OUT terminals.
Q4: What is the isolation rating of the IC694MDL645?
A4: Standard isolation is 250 VAC continuous; if using 24V OUT, it reduces to 50 VAC continuous.
Q5: What is the on-state current requirement for the input signal?
A5: The on-state current must be at least 3.2 mA.
Q6: Is this module hot-swappable?
A6: No, it is not hot-swappable. Ensure power is off before replacing.
Q7: Where can this module be installed within the RX3i system?
A7: It can be installed in any available I/O slot of the RX3i backplane.
Q8: What kind of field devices are compatible with this input module?
A8: Compatible with pushbuttons, limit switches, and electronic proximity switches.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
