Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613666033393 | ||
| +8613666033393 | |||
| 13666033393 |
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | 330103-00-04-05-02-00 |
| Probe Tip Diameter | 8.0 mm (0.31 in) |
| Thread Type | M10 x 1 |
| Probe Material | PPS tip, AISI 303/304 stainless steel body |
| Cable Type | 75Ω triaxial FEP insulated, standard |
| Total Length | 0.5 meter |
| Weight | 0.161 kg (0.35 lbs) |
| Operating Temperature | -52°C to +177°C (standard) |
| Extended Temperature Range | Up to +218°C for probe tip, +260°C for cable |
| Pressure Resistance | Viton® O-ring seal, not pressure-tested by default |
| Recommended Gap | 1.27 mm (50 mils) |
| Linear Measurement Range | 0.25 mm to 2.3 mm (10 mils to 90 mils) |
| Output Signal Sensitivity | 7.87 V/mm (200 mV/mil) ±5% (standard) |
| Frequency Response | 0 to 10 kHz, +0, -3 dB |
| Minimum Target Size | 15.2 mm (0.6 in) diameter flat target |
| Minimum Shaft Diameter | 50.8 mm (2 in); recommended ≥ 76.2 mm (3 in) |
| Mounting Torque | Max: 22.6–33.9 N·m, Recommended: 7.5–11.2 N·m depending on installation type |
FAQ
FAQ
Q1: What is the total length and weight of the 330103-00-04-05-02-00 probe?
A1: The total length is 0.5 meters and the weight is approximately 0.161 kg.
Q2: What type of thread does this model use?
A2: It uses an M10 x 1 metric thread.
Q3: What is the recommended gap for proper operation?
A3: The recommended gap is 1.27 mm (50 mils).
Q4: What is the linear measurement range of this probe?
A4: It can measure from 0.25 mm to 2.3 mm (10 mils to 90 mils).
Q5: What environments is this probe suitable for?
A5: It is designed for high-temperature environments up to 177°C, or up to 218°C with ETR version.
Q6: What type of material is used in the probe tip and housing?
A6: The tip is made of PPS, and the housing is stainless steel (AISI 303 or 304).
Q7: Is the probe pressure-sealed?
A7: Yes, it includes a Viton® O-ring but is not pressure-tested by default.
Q8: Is this probe interchangeable with non-XL Bently Nevada probes?
A8: Yes, it is both electrically and physically compatible with 3300-series non-XL components.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
