Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613666033393 | ||
| +8613666033393 | |||
| 13666033393 |
Technical Specifications
| Item | Specification |
|---|---|
| Model | 330103-00-05-10-01-05 |
| Probe Diameter | 8 mm |
| Thread Type | M10 x 1 |
| Total Length | 1.0 meter (3.3 ft) |
| Weight (Typical) | 0.323 kg |
| Probe Housing Material | AISI 303 or 304 Stainless Steel |
| Tip Material | PPS (Polyphenylene Sulfide) |
| Cable Type | 75 Ω triaxial cable, FEP insulation |
| Connector Type | ClickLoc gold-plated coaxial connector |
| Minimum Target Size | 15.2 mm flat metallic surface |
| Recommended Shaft Size | ≥ 76.2 mm (3 in) |
| Linear Range | 0.25 mm to 2.3 mm (10 to 90 mils) |
| Recommended Gap Setting | 1.27 mm (50 mils), approx. -9 Vdc |
| Operating Temp (Probe) | -52°C to +177°C |
| Storage Temp (Probe) | -52°C to +177°C |
| Humidity Effect | <3% ASF shift under 93% humidity (IEC 68-2-3) |
| Min. Cable Bend Radius | 25.4 mm |
| Tensile Strength | Probe to cable: 330 N; Cable to connector: 270 N |
FAQ
Frequently Asked Questions (FAQ)
Q1: What is the operating principle of the 330103 probe?
A1: It operates on the eddy current principle, outputting voltage proportional to the gap between the probe tip and the target.
Q2: Is it suitable for high-temperature environments?
A2: The standard version supports up to +177°C. For higher temperatures, an ETR version is available.
Q3: Can the probe length be customized?
A3: Yes. The total length is selectable from standard options between 0.5 m and 9 m.
Q4: Does it require a matching extension cable and Proximitor sensor?
A4: Yes. The system includes the probe, extension cable (if applicable), and Proximitor sensor for full functionality.
Q5: Is this probe suitable for shaft vibration monitoring?
A5: Yes. It’s commonly used for radial and axial vibration and position monitoring in fluid-film bearing machines.
Q6: Does this product comply with API 670?
A6: Yes, the 1 m and 5 m system configurations meet API 670 standards for linearity, mechanical setup, and accuracy.
Q7: Are special tools needed for installation?
A7: No. The ClickLoc connectors are designed for finger-tight installation with an audible click.
Q8: Is the probe backward compatible with earlier systems?
A8: Yes. The 3300 XL 8 mm probes are electrically and physically compatible with non-XL 3300 series 5 mm and 8 mm components.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
