Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613666033393 | ||
| +8613666033393 | |||
| 13666033393 |
Technical Specifications Table
| Parameter | Specification |
|---|---|
| Model | 330103-00-05-15-02-00 |
| Probe Tip Diameter | 8 mm |
| Thread Type | M10 x 1 |
| Housing Material | AISI 303 or 304 Stainless Steel |
| Probe Tip Material | Polyphenylene Sulfide (PPS) |
| Cable Type | 75Ω triaxial FEP-insulated standard cable |
| Total Length | 1.5 meters |
| Minimum Bend Radius | 25.4 mm |
| Linear Range | 0.25 to 2.3 mm (10 to 90 mils) |
| Recommended Gap Setting | 1.27 mm (-9 Vdc) |
| Incremental Scale Factor | 7.87 V/mm (200 mV/mil) ±5% (standard 5 m system) |
| Accuracy (DSL) | ≤±0.025 mm (±1 mil for standard 5 m system) |
| Operating Temperature (Probe) | -52°C to +177°C |
| Extended Temp Range | Up to +218°C (probe tip), +260°C (cable) |
| Proximitor Sensor Storage Temp | -52°C to +105°C |
| Humidity Effect | ≤3% ASF variation (93% RH for 56 days) |
| Minimum Shaft Diameter | 50.8 mm (recommended ≥76.2 mm) |
| Frequency Response | 0 – 10 kHz, ±3 dB |
| Minimum Target Size | 15.2 mm diameter (flat) |
| Connector Type | ClickLoc gold-plated coaxial connector |
| Total Length | 1.5 meters |
| Total Weight | 0.485 kg |
FAQ
Frequently Asked Questions (FAQ)
Q1: What are the primary applications of this probe?
A1: It is primarily used for vibration and position monitoring on fluid-film bearing machines, as well as Keyphasor and speed measurements.
Q2: Does it meet API 670 standards?
A2: Yes, the standard 5-meter 3300 XL 8 mm system complies fully with API 670 requirements.
Q3: Is it compatible with older (non-XL) Bently Nevada components?
A3: Yes, it is electrically and mechanically compatible with 3300 series 5 mm and 8 mm components.
Q4: Can this probe be used in high-temperature environments?
A4: Yes. The optional ETR version supports up to 218°C for the tip and 260°C for the cable.
Q5: Are tools required for connector installation?
A5: No tools are needed. The ClickLoc connector tightens by hand and clicks when secure.
Q6: Is field replacement supported?
A6: Yes, the probe, cable, and sensor are fully interchangeable without the need for recalibration.
Q7: Are connector protectors recommended?
A7: Yes, especially in environments exposed to oil or contaminants to ensure better sealing.
Q8: Can the cable be extended?
A8: Yes, but the combined length of the probe and extension cable must match the Proximitor sensor system length (e.g., 5 or 9 meters).
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
