Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613666033393 | ||
| +8613666033393 | |||
| 13666033393 |
Technical Specifications
| Parameter | Description |
|---|---|
| Model Number | CC-PCF901 |
| Product Name | Control Firewall Module (CF9) |
| Function | Acts as the FTE (Fault Tolerant Ethernet) communications center |
| Number of Ports | 9 (8 downlink ports for C300/Series C FIMs, 1 uplink port to supervisory FTE) |
| Compatibility | Experion PKS Series C system |
| Mounting | Plugs into CF9 Input/Output Termination Assembly (IOTA) |
| Port Type | Ethernet |
| LED Indicators | Power, Status, Port Activity (Green/Red/Off/Flashing) |
| Environmental Protection | Conformal coating available (CC prefix), uncoated available (CU prefix) |
| Power Requirement | Supplied through IOTA |
| Installation Requirements | Use #2 Phillips screwdriver, secure with 1.3 Nm torque screws |
| Dimensions | 63.5 x 124.46 x 307.34 mm |
| Weight | 0.25 kg |
FAQ
Frequently Asked Questions (FAQ)
Q1: What is the primary role of the CC-PCF901 module?
A1: It serves as a Control Firewall for the Experion Series C system, managing FTE traffic and ensuring only valid control-related communications pass through.
Q2: How many ports are available on the module?
A2: The CC-PCF901 features 9 ports—8 downlink ports for C300 controllers and one uplink port to the supervisory FTE network.
Q3: Is it necessary to use a specific screwdriver for installation?
A3: Yes, only a #2 Phillips screwdriver should be used to avoid damage to the module’s plastic mounting screw.
Q4: Can fiber optic modules be used with this firewall?
A4: Yes, optional modules like CC-FSMX01 (Single-Mode) or CC-FMMX01 (Multi-Mode) can be installed in the IOTA.
Q5: Does the CF9 support stacking or spanning tree protocol?
A5: No, stacking is not allowed, and spanning tree is not supported. Each port must be configured individually using portfast.
Q6: How is firmware upgraded on this module?
A6: Firmware is updated using the Control Firewall Update Tool available via Configuration Studio or as a standalone tool.
Q7: What happens during startup of the module?
A7: LEDs will indicate power-on, perform POST (Status LED red), then turn green upon normal operation. Ports flash when traffic is active.
Q8: What precaution should be taken before replacing the module?
A8: Ensure the system is in a safe or offline state. Follow the recommended sequence, and never use a powered screwdriver.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
