Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613666033393 | ||
| +8613666033393 | |||
| 13666033393 |
Technical Specifications
| Parameter | Value |
|---|---|
| Product Model | NINT-42C |
| Type | Main Circuit Interface Board |
| System Compatibility | ABB ACS 600 MultiDrive |
| Function | Sends control commands and receives measurement signals |
| Mounting Location | Inside the inverter phase module control section |
| Communication | Connected with NXPP, NGDR, NAMC, etc. |
| Input Voltage | Supplied from internal DC bus |
| Operating Temp Range | 0°C to +55°C (typical) |
| Cooling Method | Forced air cooling (via system) |
| Dimensions | 180 × 150 × 40 mm |
| Weight | 0.36 kg |
FAQ
Frequently Asked Questions (FAQs)
Q1: What is the main function of the NINT-42C interface board?
A1: It issues control commands and receives key measurement signals from the power modules, acting as a vital communication interface in the drive control system.
Q2: Which ABB systems use the NINT-42C?
A2: It is used in ABB ACS 600 MultiDrive drive systems.
Q3: Can the NINT-42C be replaced individually?
A3: Yes, but it must be done by qualified personnel with the system powered off, following ABB safety and handling instructions.
Q4: Which boards work alongside the NINT-42C?
A4: It works in conjunction with NXPP (distribution board), NGDR (gate driver board), and NAMC (application and motor controller board).
Q5: Does the NINT-42C board have its own IP rating?
A5: The board itself relies on the enclosure’s IP rating. Common cabinet enclosures provide IP20 or higher, depending on the configuration.
Q6: Is hot swapping supported for the NINT-42C?
A6: No. The board must not be inserted or removed under power. All power must be disconnected and verified safe before any action.
Q7: How can I detect a fault in the NINT-42C module?
A7: Faults are typically identified through system diagnostics, LED indicators, or error codes on the ABB control interface.
Q8: Do I need special software or tools to configure this board?
A8: The board itself is not configured separately. System configuration is handled via the drive control unit (e.g., NDCU) using ABB tools.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
