Products Description
| Company Information | |||
| [email protected] | |||
| Mobile | +8613666033393 | ||
| +8613666033393 | |||
| 13666033393 |
Technical Specifications
| Parameter | Description |
|---|---|
| Module Name | Bently Nevada 3500/22-01-01-00 I/O Module |
| Module Type | 10Base-T/100Base-TX Ethernet Communication |
| Protocol Support | BN Host Protocol, BN TDI Protocol over TCP/IP |
| Data Port | RJ-45 interface, 10/100 Mbps autosensing |
| Max Cable Length | 100 meters (328 feet) |
| Indicator LEDs | OK, TX/RX, CONFIG OK, TM |
| OK Relay Rating | 5A @ 24VDC/120VAC, max 120W/600VA |
| Controls | Address switch, Configuration keylock, Reset |
| Signal Ground Terminal | 2-pin terminal for instrument ground |
| Dimensions (H×W×D) | 241.3 x 24.4 x 99.1 mm |
| Weight | 0.20 kg |
| Operating Temperature | -30°C to +65°C |
| Storage Temperature | -40°C to +85°C |
| Humidity | 95% non-condensing |
| Environmental Ratings | RoHS, EMC, EN61000, EN61010 compliant |
| Hazardous Approvals | CSA, ATEX, IECEx (Zone 2, Class I Div 2) |
FAQ
Frequently Asked Questions (FAQ)
Q1: What type of Ethernet does this module support?
A1: It supports 10Base-T and 100Base-TX Ethernet using RJ-45 interface.
Q2: Which software can communicate with this module?
A2: It communicates with System 1 Condition Monitoring Software and 3500 Configuration Software.
Q3: Does this model support fiber optic communication?
A3: No. Model 146031-01 is for copper Ethernet. For fiber, use model 146031-02.
Q4: How does the OK relay function?
A4: The relay is normally energized during normal operation and de-energized during faults. It can be set to either “open” or “closed” on fault.
Q5: Can this module be used independently?
A5: No, it must be installed as part of a 3500 rack, specifically in the slot next to the power supplies.
Q6: What is the operating temperature range?
A6: -30°C to +65°C, suitable for industrial environments.
Q7: Is remote configuration supported?
A7: Yes, set the rack to PROGRAM mode using the keylock to enable remote configuration.
Q8: Does this module impact machinery protection?
A8: No, the TDI is not in the critical monitoring path and does not affect protection functionality.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
