Products Description
| Company Information | |||
| sales@xmjzjsgs.com | |||
| Mobile | +8613666033393 | ||
| +8613666033393 | |||
| 13666033393 |
Technical Specifications
| Parameter | Specification |
|---|---|
| Product Model | 330101-00-11-10-02-CN |
| Probe Type | 3300 XL 8 mm Proximity Probe |
| Application | Vibration and position measurements on fluid-film bearing machines |
| Linear Range | 2.0 mm (80 mils), from 0.25 mm to 2.3 mm |
| Recommended Gap | -9 VDC (~1.27 mm or 50 mils) |
| Scale Factor | 7.87 V/mm (200 mV/mil) ± 5% (1 m/5 m system), ±6.5% (9 m system) |
| Deviation from Straight Line | ±0.025 mm (1 mil) (1 m/5 m), ±0.038 mm (1.5 mil) (9 m) |
| Frequency Response | 0 to 10 kHz, +0/-3 dB |
| Operating Temperature (Probe) | -52°C to +177°C (standard), up to +218°C (ETR probe tip) |
| Storage Temperature (Probe) | Same as operating |
| Pressure Sealing | Viton® O-ring |
| Minimum Target Diameter | 15.2 mm (0.6 in) |
| Minimum Shaft Diameter | 50.8 mm (2 in); Recommended ≥ 76.2 mm (3 in) |
| Probe Tip Material | Polyphenylene sulfide (PPS) |
| Probe Case Material | AISI 303 or 304 stainless steel |
| Cable Type | 75Ω triaxial, FEP insulated (standard), PFA insulated (ETR) |
| Connector Type | Miniature coaxial ClickLoc with gold plating |
| Minimum Cable Bend Radius | 25.4 mm (1.0 in) |
| Thread Size | 3/8-24 UNF |
| Total Length | 1.0 meter |
| Weight | 0.323 kg |
FAQ
Frequently Asked Questions (FAQ)
Q1: What is the primary application of the 330101-00-11-10-02-CN proximity probe?
A1: It is primarily used for measuring vibration and shaft position in rotating machinery with fluid-film bearings.
Q2: Does this probe support high-temperature environments?
A2: Yes, the standard probe supports up to 177°C, and the ETR version can handle up to 218°C at the probe tip.
Q3: What material is the probe tip made of?
A3: The probe tip is molded from Polyphenylene Sulfide (PPS) for high durability.
Q4: Can I mix this probe with older 3300 series components?
A4: Yes, it is electrically and mechanically compatible with non-XL 3300 series 5 mm and 8 mm components.
Q5: What is the recommended gap setting for installation?
A5: The recommended initial gap is approximately 1.27 mm (50 mils), corresponding to -9 VDC.
Q6: How is the cable secured to prevent loosening?
A6: The ClickLoc connector provides a finger-tight, locking connection that clicks when properly secured.
Q7: Does this model require special tools for installation?
A7: No special tools are needed; the SpringLoc terminals and ClickLoc connectors are tool-free.
Q8: What is the expected linear measurement range of this probe?
A8: The linear measurement range is 2.0 mm (80 mils), starting from approximately 0.25 mm from the target.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
