Products Description
| Company Information | |||
| sales@xmjzjsgs.com | |||
| Mobile | +8613666033393 | ||
| +8613666033393 | |||
| 13666033393 |
Technical Specifications
| Parameter | Value |
|---|---|
| Model | 330100-50-00 |
| Type | 3300 Proximitor® Sensor |
| Input | Accepts 3300 5 mm or 8 mm probe and extension cable |
| Output Resistance | 50 Ω |
| Power Requirement | -17.5 Vdc to -26 Vdc, max 12 mA |
| Recommended Gap | 1.27 mm (50 mils) |
| Linear Range | 0.25 mm to 2.3 mm (10 to 90 mils) |
| Scale Factor | 7.87 mV/μm (200 mV/mil) ±6.5% |
| Frequency Response | 0 to 6.5 kHz with up to 305 m of wiring |
| Temperature Stability | ±10% within -35°C to +177°C |
| Probe Temperature | -51°C to +177°C (XL probes) |
| Extension Cable Temp. | -51°C to +177°C |
| Proximitor Operating Temp. | -51°C to +100°C |
| Storage Temperature | -51°C to +100°C |
| Relative Humidity | 100% condensing (non-submersible) |
| Minimum Shaft Diameter | Recommended: 76.2 mm (3 in) |
| Installation Note | Minimum probe spacing: 40 mm axial / 74 mm radial |
| Total Length | 5.0 meters |
| Minimum Bend Radius | 25.4 mm (1.0 inch) |
| Weight | 0.25 kg (typical) |
| Mounting | 4-hole pattern with integral isolation plate |
| Certifications | CSA/NRTL/C, BASEEFA/CENELEC approvals |
FAQ
Frequently Asked Questions (FAQs)
Q1: What types of probes are supported by 330100-50-00?
A1: It supports 3300 series 5 mm or 8 mm probes with compatible extension cables.
Q2: What is the total system length of this model?
A2: The total length is 5.0 meters.
Q3: Can it operate in high-temperature environments?
A3: Yes, probes and extension cables are rated up to +177°C, and the sensor itself up to +100°C.
Q4: What is the recommended gap between the probe and the target?
A4: 1.27 mm (50 mils) is the recommended gap setting.
Q5: What is the smallest shaft diameter it can monitor?
A5: Recommended minimum shaft diameter is 76.2 mm. Smaller diameters may require special arrangements.
Q6: Is individual component matching or calibration required?
A6: No. The system components are fully interchangeable without manual calibration.
Q7: What is the frequency response range?
A7: The output frequency range is from 0 to 6.5 kHz.
Q8: Is the system sensitive to power supply voltage variations?
A8: No. It exhibits less than 2 mV change per volt variation in supply voltage.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
