Products Description
| Company Information | |||
| sales@xmjzjsgs.com | |||
| Mobile | +8613666033393 | ||
| +8613666033393 | |||
| 13666033393 |
Technical Specifications
| Parameter | Specification |
|---|---|
| Model | 330400-02-CN |
| Sensitivity | 100 mV/g ±5% (10.2 mV/m/s²) |
| Acceleration Range | 50 g peak (490 m/s²) within 10 Hz to 15 kHz |
| Frequency Response | 10 Hz – 15 kHz (±3 dB), 30 Hz – 10 kHz (±10%) |
| Amplitude Linearity | ±1% up to 50 g peak |
| Noise Floor | 0.004 g rms (0.039 m/s²) in 10 Hz to 15 kHz |
| Transverse Sensitivity | <5% of axial |
| Mounted Resonant Frequency | >30 kHz |
| Amplitude of Resonant Peak | ≤ 20 dB |
| Power Supply Voltage | -24 ± 0.5 VDC |
| Bias Current | 2 mA nominal |
| Output Bias Voltage | -8.5 ± 0.5 VDC |
| Temperature Sensitivity | -11% to +3% over full range |
| Operating Temperature | -55°C to +121°C (-67°F to +250°F) |
| Shock Survivability | 5000 g peak (49,050 m/s²) |
| Relative Humidity | 100% condensing, hermetically sealed |
| IP Rating | Equivalent to IP68 (sensor only) |
| Magnetic Susceptibility | <2.21 mm/s²/gauss (225 mg/gauss @ 50 gauss) |
| Mounting Torque | 4.1 N·m (3.0 ft·lb) |
| Mounting Angle | Any orientation |
| Case Material | 316L Stainless Steel |
| Connector | 3-pin MIL-C-5015 Receptacle |
| Sensor Head Diameter | 23 mm (0.93 in) |
| Height (including stud) | 59 mm (2.3 in) |
| Weight (no cable) | 100 g (0.1 kg / 3.5 oz) |
| Maximum Cable Length | 305 m (1000 ft) without signal degradation |
FAQ
FAQ – Frequently Asked Questions
Q1: What is the sensitivity of the 330400-02-CN accelerometer?
A1: It has a sensitivity of 100 mV/g ±5%.
Q2: What is the maximum acceleration range this sensor can detect?
A2: It can detect up to 50 g peak acceleration (490 m/s²).
Q3: What environmental conditions can the 330400 operate in?
A3: It operates between -55°C to +121°C and can withstand 100% condensing humidity.
Q4: What is the typical frequency response of this sensor?
A4: 10 Hz to 15 kHz (±3 dB), 30 Hz to 10 kHz (±10%).
Q5: How much does the 330400 sensor weigh?
A5: Approximately 100 g (0.1 kg) without cable.
Q6: Is this sensor suitable for hazardous environments?
A6: Yes, it meets multiple certifications including CSA, ATEX, and IECEx.
Q7: Can I mount the sensor in any orientation?
A7: Yes, it supports mounting in any direction.
Q8: What is the recommended mounting torque?
A8: 4.1 N·m (3.0 ft·lb).
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
