Emerson KJ4001X1-BE1 8-Wide I/O Carrier with Shield Bar

FAQ

Q1: Can the KJ4001X1-BE1 be hot-swapped?
A1: No, it must not be inserted or removed while system power is on.

Q2: What is the operating temperature range of this module?
A2: It operates from -40°C to 70°C, suitable for industrial environments.

Q3: Does this module have an IP rating?
A3: Yes, it is rated IP20 and should be installed inside a control enclosure.

Q4: Is calibration required for this product?
A4: No, the unit does not require calibration.

Q5: Do unused module slots need to be covered?
A5: Yes, a cover (KJ4001X1-FA1) must be used for permanently unused slots.

Q6: Can internal parts of this module be replaced?
A6: No, there are no user-serviceable parts, and it should not be disassembled.

Q7: What power supply should be used with this module?
A7: Field power must not exceed 30 VDC and should come from a regulated DC source.

Q8: What is the maximum length allowed for connected carriers and extenders?
A8: The combined length of carriers and LocalBus extenders must not exceed 6.5 meters.