Bently Nevada 330104-00-15-10-02-05 3300 XL 8 mm Proximity Probe

FAQ

Q1: What is the typical application of the 330104-00-15-10-02-05 proximity probe?
A1: It is used primarily for measuring vibration and shaft position on fluid-film bearing machines, and for Keyphasor and speed monitoring.

Q2: Does this probe comply with API 670 specifications?
A2: Yes, when used with a standard 5-meter system, it fully complies with API 670 for linear range, accuracy, and mechanical configuration.

Q3: Is component matching or bench calibration required before installation?
A3: No, all 3300 XL 8 mm system components are fully interchangeable and factory-calibrated to AISI 4140 steel. No field matching is needed.

Q4: Is the system resistant to radio frequency or electromagnetic interference?
A4: Yes, the probe and sensor are highly immune to RFI/EMI and can be installed in fiberglass or plastic enclosures without shielding.

Q5: What are the dimensions and weight of this model?
A5: The total length is 1.0 meter, and the system weight is approximately 0.323 kg.

Q6: Can I use this probe in oil-prone environments?
A6: Yes, it is available with a FluidLoc cable option to prevent fluid ingress through the cable interior.

Q7: What torque is recommended during installation?
A7: The recommended torque for the probe case is 7.5 N•m (66 in•lbf) to ensure proper thread engagement without over-tightening.

Q8: Is this probe suitable for high-temperature applications?
A8: Yes, the standard model operates up to 177°C. For environments exceeding this, use the Extended Temperature Range (ETR) version rated up to 218°C.