Products Description
| Company Information | |||
| sales@xmjzjsgs.com | |||
| Mobile | +8613666033393 | ||
| +8613666033393 | |||
| 13666033393 |
Technical Specifications
| Parameter | Value |
|---|---|
| Sensitivity | 100 mV/g ±5% (10.2 mV/m/s²) |
| Acceleration Range | 0–50 g (490 m/s²) peak |
| Amplitude Linearity | ±1% up to 50 g |
| Frequency Response | 10 Hz to 15 kHz (±3 dB); 30 Hz to 10 kHz (±10%) |
| Broadband Noise Floor | 0.039 m/s² (0.004 g) rms |
| Transverse Sensitivity | Less than 5% of axial |
| Mounted Resonant Frequency | Greater than 30 kHz |
| Resonant Peak Amplitude | 20 dB maximum |
| Temperature Sensitivity | -11% to +3% (typical over full operating range) |
| Base Strain Sensitivity | 0.005 g/mstrain (for serial numbers starting with “G”) |
| Input Voltage | -24 ± 0.5 Vdc |
| Output Bias Voltage | -8.5 ± 0.5 Vdc |
| Bias Current | 2 mA nominal |
| Grounding | Case isolated |
| Maximum Cable Length | 305 m (1000 ft) without signal degradation |
| Protection Rating | Equivalent to IP68 (sensor only) |
| Operating & Storage Temperature | -55°C to +121°C |
| Shock Survivability | 5000 g (49,050 m/s²) peak |
| Relative Humidity | 100% condensing (non-submerged) |
| Magnetic Field Susceptibility | <2.21 mm/s²/gauss (225 mg/gauss @ 50 gauss, 50–60 Hz) |
| Case Material | 316L stainless steel |
| Connector | 3-pin MIL-C-5015 receptacle |
| Mounting Torque | 4.1 N·m (3.0 ft·lb) |
| Mounting Angle | Any orientation |
| Sensor Head Diameter | 23 mm |
| Height | 59 mm (including mounting stud) |
| Weight | 100 g (0.1 kg) typical, excluding cable |
FAQ
Frequently Asked Questions (FAQ)
Q1: What is the sensitivity of the 330400-02-00 sensor?
A1: The sensitivity is 100 mV/g ±5%, equivalent to 10.2 mV/m/s².
Q2: What is the maximum acceleration it can measure?
A2: It can measure up to 50 g (490 m/s²) peak acceleration.
Q3: What is the frequency response range of this accelerometer?
A3: The frequency response is 10 Hz to 15 kHz (±3 dB), and 30 Hz to 10 kHz (±10%).
Q4: What is the allowable operating temperature range?
A4: The sensor can operate and be stored between -55°C and +121°C.
Q5: Is the sensor waterproof or dustproof?
A5: Yes, it is rated equivalent to IP68 for dust and water ingress protection (sensor only).
Q6: How much does the sensor weigh?
A6: The typical weight is 100 grams (0.1 kilograms), excluding the cable.
Q7: What installation torque is recommended?
A7: A torque of 4.1 N·m (3.0 ft·lb) is recommended during installation.
Q8: How long can the connecting cable be without signal loss?
A8: The maximum cable length is 305 meters (1000 feet) without signal degradation.
Tags
Packing & Delivery
We will use wear-resistant cartons to seal the boxes, and take photos for your confirmation before sealing. We will pack the boxes only after confirmation.
For express delivery, we will use DHL, UPS, TNT, FedEx and EMS.
Please rest assured that we have a deep cooperation with express delivery companies and can ensure that your goods are delivered to you in good condition.
